Dual 3.5” Hearts, 12” Long
304 Stainless Steel Exhaust Tips are hand made and hand TIG welded in the PNW.
Price is for one tip. One in stock.
Tip Main Size: 3.5” Hearts are 4.25” wide and 3.75” wide. Total width at the end of the tip is 8.5”.
Tip Length: Hearts are 12” long. Overall length is 19”.
Inlet Size: 2.5”. Can be trimmed up to 3” if needed.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and use of the product
Not recommend for exhausts that hit the ground. Constant hitting of the heart tip may cause damage to the tip.
304 Stainless Steel Exhaust Tips are hand made and hand TIG welded in the PNW.
Price is for one tip. One in stock.
Tip Main Size: 3.5” Hearts are 4.25” wide and 3.75” wide. Total width at the end of the tip is 8.5”.
Tip Length: Hearts are 12” long. Overall length is 19”.
Inlet Size: 2.5”. Can be trimmed up to 3” if needed.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and use of the product
Not recommend for exhausts that hit the ground. Constant hitting of the heart tip may cause damage to the tip.
304 Stainless Steel Exhaust Tips are hand made and hand TIG welded in the PNW.
Price is for one tip. One in stock.
Tip Main Size: 3.5” Hearts are 4.25” wide and 3.75” wide. Total width at the end of the tip is 8.5”.
Tip Length: Hearts are 12” long. Overall length is 19”.
Inlet Size: 2.5”. Can be trimmed up to 3” if needed.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and use of the product
Not recommend for exhausts that hit the ground. Constant hitting of the heart tip may cause damage to the tip.