Dual Turn Up Hearts
PLEASE NOTE: This is a one-person business, and these tips are made to order. Orders may take 2-6 weeks to complete.
Free shipping within the Continental U.S
Price is for one tip.
304 Stainless Steel Exhaust Tips are handmade and hand TIG welded in the Pacific Northwest.
Tip Main Size: The 3” heart is 3” tall and 3.25” wide. The 3.5” heart is 3.75” tall and 4.25” wide. The 3” hearts are around 7” wide and the 3.5” hearts are around 9” wide.
Printable Paper Cutouts For Sizing to see what fits your car best!
Tip Length: Length before pie cuts is 6” and after pie cuts is 6”. 2 pie cuts make these tips have a 30-degree upward angle. The overall length is roughly 18-20” long.
Inlet Size: The 3” hearts have a 2” inlet that can be trimmed back to be 2.5”. The 3.5” hearts have a 2.5” inlet that can be trimmed back to be 3”.
I recommend 3.5” hearts for most cars. I recommend 3” hearts for smaller cars.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
No hole is drilled at the bottom of these tips for water drainage. It is recommended to drill one if it is needed when you have these professionally installed.
Please contact me if you would like an update on the status of your order.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and/or use of the product
Not recommend for exhausts that hit the ground. Constant hitting of the heart tip may cause damage to the tip.
PLEASE NOTE: This is a one-person business, and these tips are made to order. Orders may take 2-6 weeks to complete.
Free shipping within the Continental U.S
Price is for one tip.
304 Stainless Steel Exhaust Tips are handmade and hand TIG welded in the Pacific Northwest.
Tip Main Size: The 3” heart is 3” tall and 3.25” wide. The 3.5” heart is 3.75” tall and 4.25” wide. The 3” hearts are around 7” wide and the 3.5” hearts are around 9” wide.
Printable Paper Cutouts For Sizing to see what fits your car best!
Tip Length: Length before pie cuts is 6” and after pie cuts is 6”. 2 pie cuts make these tips have a 30-degree upward angle. The overall length is roughly 18-20” long.
Inlet Size: The 3” hearts have a 2” inlet that can be trimmed back to be 2.5”. The 3.5” hearts have a 2.5” inlet that can be trimmed back to be 3”.
I recommend 3.5” hearts for most cars. I recommend 3” hearts for smaller cars.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
No hole is drilled at the bottom of these tips for water drainage. It is recommended to drill one if it is needed when you have these professionally installed.
Please contact me if you would like an update on the status of your order.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and/or use of the product
Not recommend for exhausts that hit the ground. Constant hitting of the heart tip may cause damage to the tip.
PLEASE NOTE: This is a one-person business, and these tips are made to order. Orders may take 2-6 weeks to complete.
Free shipping within the Continental U.S
Price is for one tip.
304 Stainless Steel Exhaust Tips are handmade and hand TIG welded in the Pacific Northwest.
Tip Main Size: The 3” heart is 3” tall and 3.25” wide. The 3.5” heart is 3.75” tall and 4.25” wide. The 3” hearts are around 7” wide and the 3.5” hearts are around 9” wide.
Printable Paper Cutouts For Sizing to see what fits your car best!
Tip Length: Length before pie cuts is 6” and after pie cuts is 6”. 2 pie cuts make these tips have a 30-degree upward angle. The overall length is roughly 18-20” long.
Inlet Size: The 3” hearts have a 2” inlet that can be trimmed back to be 2.5”. The 3.5” hearts have a 2.5” inlet that can be trimmed back to be 3”.
I recommend 3.5” hearts for most cars. I recommend 3” hearts for smaller cars.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
No hole is drilled at the bottom of these tips for water drainage. It is recommended to drill one if it is needed when you have these professionally installed.
Please contact me if you would like an update on the status of your order.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and/or use of the product
Not recommend for exhausts that hit the ground. Constant hitting of the heart tip may cause damage to the tip.